Spindle speed, feed rate, metal removal rate and cutting power for milling, drilling and turning with carbide tools.
Results
- Spindle speed
rpm- Table feed
- Metal removal rate
- Cutting power
- Spindle motor power needed
Results are engineering estimates for preliminary design. Verify critical values with codes, vendor data or a qualified engineer.
Formula used
Spindle speed n = (Vc × 1000) ÷ (π × D)
Milling: Vf = n × fz × z; Q = ap × ae × Vf ÷ 1000; Pc = ap × ae × Vf × kc ÷ (60 × 10⁶)
Drilling: Vf = n × fn; Pc = fn × Vc × D × kc ÷ 240 000
Turning: Q = Vc × ap × fn; Pc = Vc × ap × fn × kc ÷ 60 000
How to use this calculator
- Pick the operation and the workpiece material; Vc and kc fill in with starting values for carbide.
- Enter the tool (or workpiece, for turning) diameter.
- Enter feed per tooth or per revolution from the tool maker’s catalogue.
- Check the spindle power against your machine before running.
Worked example
Milling mild steel with a 12 mm, 4-flute carbide end mill at Vc = 180 m/min: n = 180 000 ÷ (π × 12) = 4775 rpm. At fz = 0.05 mm the feed is 4775 × 0.05 × 4 = 955 mm/min. With ap = 2 mm and ae = 6 mm the removal rate is 11.5 cm³/min and cutting power ≈ 0.34 kW (0.43 kW at the spindle).
Frequently asked questions
Are these speeds safe for HSS tools?
No. Presets are for coated carbide. For HSS, start at roughly one quarter to one third of the carbide cutting speed.
Why does kc matter?
kc is the force needed to remove one square millimetre of chip. It rises for thin chips and harder materials; tool makers publish kc1.1 and an mc exponent for precise values.
What limits feed in practice?
Rigidity, tool stick-out, chip evacuation and surface-finish requirements. Treat the result as a starting point and adjust from chip colour, sound and finish.