Calculate pipe inside diameter, empty weight per metre, total dry weight, water-filled weight and internal volume for ASME/IS process piping.
Results
- Inside diameter (ID)
- Empty weight per unit length
- Total empty pipe weight
- Water-filled total weight
- Internal volume
Results are engineering estimates for preliminary design. Verify critical values with codes, vendor data or a qualified engineer.
Formula used
Inside diameter ID = OD − 2 × t. Steel cross-section Am = π × (OD² − ID²) ÷ 4. Empty weight per metre w = Am × ρ.
Internal volume V = (π × ID² ÷ 4) × L. Hydrotest / water-filled weight adds V × 1000 kg.
How to use this calculator
- Enter pipe OD and wall thickness from ASME B36.10M / B36.19M.
- Enter total run length and pipe alloy density.
- Use the water-filled weight for pipe rack and hanger load design, and internal volume for flushing or hydrotest water planning.
Worked example
A 6 m length of 4" Sch 40 carbon steel pipe (OD 114.3 mm, wall 6.02 mm, ρ = 7850 kg/m³) has ID = 102.26 mm, empty mass = 16.07 kg/m (96.4 kg total) and water-filled weight = 145.7 kg.
Frequently asked questions
Why does pipe outside diameter stay fixed across schedules?
So standard fittings, flanges and pipe clamps fit the same NPS size regardless of pressure rating. Increasing the schedule thickens the wall inward and reduces the inside diameter.
Should pipe supports be sized for empty or water-filled weight?
Always size supports for at least the water-filled weight plus insulation, even on gas or steam lines, because the line is filled with water during hydrostatic pressure testing.
What is the difference between Schedule 40 and Schedule 40S?
For NPS 12 and smaller, ASME B36.10M Sch 40 (carbon steel) and ASME B36.19M Sch 40S (stainless steel) have identical wall thicknesses; above NPS 12 they differ.