New in the library Presented by Jaadu Digital ↗
Free tools

Free engineering tool · verified formulas

Bearing L10 Life & Bore Number Calculator

No sign-up · calculates in your browser

Calculate ISO 281 rolling bearing L10 fatigue life in revolutions and operating hours, and decode metric bearing bore codes (00–40) to shaft diameter.

Free engineering tool Formula, worked example and FAQs below · results update as you type
rpm
code
e.g. 6212 → 12 (60 mm); 00=10, 01=12, 02=15, 03=17, 04–40 = code × 5 mm

Results

Basic rating life L10
— million rev
Operating life L10h
—
Decoded shaft bore diameter
—
Load ratio C / P
—

Results are engineering estimates for preliminary design. Verify critical values with codes, vendor data or a qualified engineer.

Advertisement

Formula used

ISO 281 basic rating life: L10 = (C ÷ P)p [million revolutions], where p = 3 for ball bearings and p = 10/3 for roller bearings. Operating hours: L10h = (106 ÷ (60 × N)) × L10.

Metric bore decoding: 00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm, and 04–40 = code × 5 mm.

How to use this calculator

  1. Select ball or roller bearing exponent.
  2. Enter dynamic load rating C from the bearing catalogue and equivalent load P.
  3. Enter shaft speed in rpm and the last two digits of the bearing designation.
  4. Check L10h against target machine life (typically 20,000–40,000 h for continuous industrial pumps and fans).

Worked example

A 6212 deep-groove ball bearing (C = 52 kN, bore code 12 → 60 mm) under P = 6.5 kN at 1450 rpm gives C/P = 8, L10 = 8³ = 512 million rev and L10h ≈ 5,885 hours.

Frequently asked questions

What does L10 bearing life mean?

L10 is the fatigue life reached or exceeded by 90 % of a large group of identical bearings before the first sign of subsurface fatigue spalling under constant load and speed.

How do I decode the last two digits of a bearing number?

Codes 00, 01, 02 and 03 map to 10, 12, 15 and 17 mm bores respectively. From 04 upwards, multiply the two-digit code by 5 to get the bore diameter in millimetres.

How much does reducing bearing load extend life?

Because life varies with the cube (ball) or 10/3 power (roller) of C/P, cutting the radial load in half increases ball bearing fatigue life by 8 times.

Your saved guides

Saved only in this browser. No account required.

Advertisement