# Bearing L10 Life & Bore Number Calculator

> Calculate ISO 281 rolling bearing L10 fatigue life in revolutions and operating hours, and decode metric bearing bore codes \(00–40\) to shaft diameter.

Canonical: https://engitech.in/bearing-life-l10-number-calculator/ | Published: 2026-11-18 | Updated: 2026-11-18

Calculate ISO 281 rolling bearing L10 fatigue life in revolutions and operating hours, and decode metric bearing bore codes (00–40) to shaft diameter.

Free engineering tool Formula, worked example and FAQs below · results update as you type

Results

**Basic rating life L10**

—

million rev

**Operating life L10h**

—

**Decoded shaft bore diameter**

—

**Load ratio C / P**

—

Results are engineering estimates for preliminary design. Verify critical values with codes, vendor data or a qualified engineer.

## Formula used

ISO 281 basic rating life: **L10** = (C ÷ P)p [million revolutions], where **p = 3** for ball bearings and **p = 10/3** for roller bearings. Operating hours: **L10h** = (106 ÷ (60 × N)) × L10.

Metric bore decoding: 00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm, and 04–40 = code × 5 mm.

## How to use this calculator

1. Select ball or roller bearing exponent.
2. Enter dynamic load rating C from the bearing catalogue and equivalent load P.
3. Enter shaft speed in rpm and the last two digits of the bearing designation.
4. Check L10h against target machine life (typically 20,000–40,000 h for continuous industrial pumps and fans).

## Worked example

A 6212 deep-groove ball bearing (C = 52 kN, bore code 12 → **60 mm**) under P = 6.5 kN at 1450 rpm gives C/P = 8, L10 = 8³ = **512 million rev** and L10h ≈ **5,885 hours**.

## Frequently asked questions

**What does L10 bearing life mean?**

L10 is the fatigue life reached or exceeded by 90 % of a large group of identical bearings before the first sign of subsurface fatigue spalling under constant load and speed.

**How do I decode the last two digits of a bearing number?**

Codes 00, 01, 02 and 03 map to 10, 12, 15 and 17 mm bores respectively. From 04 upwards, multiply the two-digit code by 5 to get the bore diameter in millimetres.

**How much does reducing bearing load extend life?**

Because life varies with the cube (ball) or 10/3 power (roller) of C/P, cutting the radial load in half increases ball bearing fatigue life by 8 times.

## More free engineering tools

[**Motor Torque, Power & Current Calculator**Convert motor power and speed to shaft torque, or torque to power, and estimate full-load current for three-phase and single-phase motors.](https://engitech.in/motor-torque-power-calculator/)[**Bolt Tightening Torque & Preload Calculator**Tightening torque and clamp-load preload for metric coarse bolts by property class (4.6 to 12.9) and lubrication.](https://engitech.in/bolt-torque-calculator/)[**Hydraulic Cylinder Force, Speed & Time Calculator**Push and pull force, extend and retract speed and cycle time of a double-acting hydraulic cylinder.](https://engitech.in/hydraulic-cylinder-calculator/)[**Pulley, Belt Speed & Belt Length Calculator**Driven speed, speed ratio, belt speed, open-belt length and wrap angle for V-belt and flat-belt drives.](https://engitech.in/pulley-belt-calculator/)[**Gear Reducer Output Speed & Torque Calculator**Output speed, output torque and required gearbox rating from motor power, input speed, gear ratio, efficiency and service factor.](https://engitech.in/gear-reducer-calculator/)[**CNC Feeds & Speeds Calculator**Spindle speed, feed rate, metal removal rate and cutting power for milling, drilling and turning with carbide tools.](https://engitech.in/cnc-feeds-speeds-calculator/)

[All calculators →](https://engitech.in/engineering-tools/)
